Racks built with wood plans in double listellar of poplar ennobled in oak and angular aluminium uprights thickness 5 mm. sides 50 x 30 mm. A sturdy concealed system is used for locking the plans on the aluminium profiles, without visible joining inserts in order to give the rack a clean and pleasant appearance.
The structure rests on the ground with adjustable stainless steel spikes and brass discs under spikes; suitable solution for optimise vibration and acoustic performance. Extra, on request, it is possible to mount instead of the spikes, a kit of rubber wheels on ball bearings, chromed steel body. The capacity of each plans has been tested with a weight of 120 kg.
MODELS (on request it is possible to vary the dimensions of the plans)
THI 2p measures east. wide 58, deep 40, high 37 cm. (c. spikes) - 39,5 cm. (c. wheels) int. measures wide 49 cm. distance between plans 24,5 cm.
THI 3p ext. measures wide 58, deep 40, high 61 cm. (c. spikes) - 63,5 cm. (c. wheels) int. measures wide 49 cm. distance between plans 20-24,5 cm.
THI 4p ext. measures wide 58, deep 40, high 80,5 cm. (c. spikes) - 83 cm. (c. wheels) int. measures wide 49 cm. distance between plans 15-20-24,5 cm.
TKE 2p ext. measures wide 100, deep 40, high 37 cm. (c. spikes) - 39,5 cm. (c. wheels) int. measures wide 81 cm. distance between plans 24,5 cm.
TKE 3p ext. measures wide 100, deep 40, high 61 cm. (c. spikes) - 63,5 cm. (c. wheels) int. measures wide 81 cm. distance between plans 20-24,5 cm.
TKE 4p ext. measures wide 100, deep 40, high 80,5 cm. (c. spikes) - 83 cm. (c. wheels) int. measures wide 81 cm. distance between plans 15-20-24,5 cm.
Stands for loudspeakers (the top plan may be required for measurements corresponding to specific loudspeakers)
YZ6 (pair) measures base plan wide 26, deep 32 cm. measures top plan wide 18, deep 28 cm. high 60 cm. (incl. spikes)
YZ7 (pair) measures base plan wide 26, deep 32 cm. measures top plan wide 18, deep 28 cm. high 70 cm. (incl. spikes)
The stands for loudspeakers are composed of plans in double listellar of poplar ennobled in oak mounted on aluminium columns square section thickness 2 mm. sides 100 x 100 mm. Inside the columns is inserted mdf to make the support dense for optimize the acoustic performance, alternatively, to further weigh down the support, the internal space can be filled with various materials such as sand or lead pellets.
The supports rest on the ground by means of stainless steel spikes and brass disks under spikes. For the support of the speakers is supplied as standard a kit of stainless steel spikes on anti-vibration rubber. The kit is fixed under the speakers by means of a dual lock anchoring system. The spikes fit into the brass bushings placed on the tops, securing the speakers anti-tilt. The spikes suspension system allows the damping of vibrations, improving the purity and precision of the sound.
